Full Monitoring

With easy installation, WEG Motor Scan is coupled directly to the motor and can be used on WEG motors in frames from 63 to 450.

It makes a complete diagnosis of the motor operation by means of temperature measurement, vibration analysis, running time, load, speed and lubrication interval, in addition to being able to operate with alert levels to help the predictive maintenance. 

It also promotes greater efficiency in the preventive maintenance of the motors, since it allows the exact identification of the equipment that can present future failures, causing a faster and efficient maintenance, with little or no stop in the production.

 
 
With WEG Motor Scan you will be able to

With WEG Motor Scan you will be able to

  • Connect all the sensors at the plant
  • Synchronize data through WEG IoT Platform
  • Name and monitor as many motors as you need
  • Analyze data sent to the cloud
  • Find your motor everywhere 

 

Funcionalities

  • Motor frame: 63 to 450

  • Triaxial vibration measurement (up to 3 kHz) in global speed and acceleration values

  • Vibration spectrum

  • Unbalance and misalignment diagnosis.

  • Surface temperature measurement

  • Estimated load, power, speeds and supply frequency (for motors with direct starter or soft-starter)

  • Motor running time measurement

  • Bearing relubrication interval

  • Battery-powered, estimated service life over 3 years (according to the application);

  • Ambient temperature: -40 to 80°C

  • Bluetooth® communication via App and/or Gateway

  • Dimensions: 44 x 38 x 25 mm

  • Protection rating: IP66

  • Direct Starter or Frequency Inverter

  • Data storage capacity: 3 months

  • Certifications: Safety/EMC/Radio for the markets: South Africa, Australia, Brazil, Canada, Chile, Colombia, USA, Europe, Malaysia

 
Product Differentials

Product Differentials

  • Increases equipment efficiency

  • Maintenance routine optimization

  • Economy with spare parts replacement

  • Ready for Industry 4.0

  • Add value to the product (OEM’s) 

  • Add value to the service (maintenance companies)

  • Downtime reduction

FAQ

Do you have any doubts about WEG Motor Scan? Check the answers for our Frequently Asked Questions.

You'll need to remember the email address used in your account to perform automatic recovery. Just go to https://iot.weg.net and click on the "Forgot your password?" Link.
Enter your email and click on "Send verification code". Open the email with the title similar to "Verification code", copy the received code and paste it into the according field. Click "Verify code" and "Continue," then enter your new password.
Use this email to access content via the link available or to download the app from one of the available app stores. If you do not already have an account, navigate to https://iot.weg.net and click on "Sign Up" to create an account.
You will already have access to the plant that you were invited when you finish your registration.

You can follow one of the links below to be redirected to the app store on your smartphone or tablet.

You must be a plant administrator to grant access to other people. You can do this from the "My Plants" panel and clicking the "More" button of the plant you want to share. Click on "User Management", add the email of whom you want to add and choose the type of access to be granted.
Yes. To activate the sensor, use the mobile app, click on "New Device", then "Select" and "Activate". Then position the sensor according to the instructions provided by the application. Attention: Once activated, the sensor must be configured within five (5) minutes, otherwise it will automatically return to the deactivated mode.

Know more about WEG's news about Industry 4.0

WEG Group - Motors Business Unit
  • Avenida Prefeito Waldemar Grubba, 3300 - 89256-900 - Jaraguá do Sul - SC
  • Phone: +55 47 3276 4000
  • E-mail: motores@weg.net