WEG
  • WEG Motor Scan
  • Full Monitoring
  • How it works
  • Downloads
  • Contact
  • FAQ
  • Updates
  • VIDEOS

NEW ITEMS AND UPDATES

WEG Motor Scan was developed to be used on electric motors, but now it can be used in other machines, such as gearmotors, pumps, fans, compressors and other systems driven by electric motors. Thus, your plant can be monitored with a single solution.

NOTE!

The new items and updates referred to in this document are applied when the machine on which the sensor was installed is not an electric motor.

When the machine is an electric motor, refer to the General Installation and Operation Manual.

SENSOR SETUP FOR OTHER ASSETS

After installing and registering the application, enable the sensor and start its setup. The setup steps can be viewed directly in the app or as indicated in the procedure below:

1.Add new sensor:

Click on the "NEW DEVICE" button and select the "Setup" option in the options menu.

2.Select the “Other” application and use NFC or Bluetooth to pair with the sensor (depending on the smartphone model).

3.Register the sensor at a plant:

Choose at which plant you want to register the sensor.

The list will show the plants registered on WEG IoT Platform for which the user is the administrator.

Don't you have a registered plant?

Click on “New plant” and register one.

4.Create a sensor name:

The sensor name will be used to identify it in the pairing and on WEG IoT Platform.

The name may contain up to 10 characters.

The name must not contain special characters.

5.Add tags to find the sensor easily on WEG IoT Platform.

You may add as many tags as needed.

6.Inserir detalhes sobre o equipamento que será monitorado.

As informações não são obrigatórias e podem ser modificadas na WEG IoT Platform.

7.Selecionar o ativo:

Selecionar o tipo de equipamento que o sensor será instalado.

O equipamento poderá ser modificado na WEG IoT Platform

8.Inserir os limites de alerta e crítico para o sensor.

Os limites são obrigatórios e podem ser modificados na WEG IoT Platform.

9.Sincronização:

Para finalizar aguarde a sincronização dos dados, aguardando até que o firmware para aplicações diversas seja enviado ao sensor e o seu cadastro na WEG IoT Platform finalizado.

Acesse a WEG IoT Platform para verificar se o sensor aparece na planta.

A partir de agora, o sensor está corretamente configurado e realizará medições de vibração e temperatura a cada 10 minutos.

Utilize o smartphone ou gateway para baixar as medições e enviá-las a WEG IoT Platform.

ATENÇÃO!

Dependendo do modelo do aparelho e/ou da versão do software, a conexão entre o dispositivo móvel e o sensor pode não se estabelecer. Nesse caso, recomenda-se utilizar um outro aparelho para fazer a conexão.

Atualizações anteriores

WEG MOTOR SCAN FIRMWARE 2.0 (02/10/2019)

 

Grupo WEG - Unidade Motores
  • Avenida Prefeito Waldemar Grubba, 3300 - 89256-900 - Jaraguá do Sul - SC
  • Telefone: +55 47 3276 4000
  • E-mail: motores@weg.net
 
Preferências de Cookies
Aviso de Privacidade | Declaração de Uso de Cookies | Termos e Condições de Uso