text.skipToContent text.skipToNavigation text.skipToFooter

APW11 Self-Supporting Frequency Inverter

It is an innovative technological solution used to drive three-phase induction motors, with the option of installation in self-supporting conditions in clean, ventilated or air-conditioned electrical rooms. The APW11 was designed to offer a solution that enables to streamline the physical space providing simple installation and operation. In addition, when uses in combination with the CFW11 frequency inverter, it incorporates the resources, special functions, hardware and software characteristics of such inverter, providing a compact, robust and flexible solution.

The APW11 can be supplied on a panel with degree of protection IP20/IP21 with CFW11 (sizes E, F or G), built-in fuse and switch-disconnector or as assembly kits.

Cabinet-built ASW06

It is a complete drive with the SSW06 soft-starter.

CFW10 Easy Drive

Easy and optimized resource for quick installation, programming and operating. The CFW10 covers power levels from 0.18 to 4 kW (0.25 to 5 HP).

Make your life easier can be a fast installation or a built-in keypad to configure instead trimpot and dip switch or even a quick replacement of similar product. The CFW10 series are exactly all that together in a compact product.

CFW100 Mini Drive

The smallest Drive on the market. The CFW100 covers power levels from 0.18 to 0.75 kW (0.25 to 1 HP).

CFW501 HVAC-R

All special functions and technical characteristics dedicated to get the full HVAC-R potencial. The CFW501 covers power levels from 0.18 to 7.5kW (0.25 to 10 HP).

CFW700 General Purpose Drive

General purpose applications require everything in the same Drive. The CFW700 covers power levels from 1.1 to 132kW (1.5 to 150 HP).

One of the main focus for WEG Drives is have a robust product for general purpose applications. The CFW700 is a hight performance product with torque and speed control.

CFW701 HVAC-R

The HVAC-R market deserves a dedicated and complete Drive. The CFW701 covers power levels from 1.1 to 132 kW (1.5 to 175 HP).

Drive with AFW11 Frequency Inverter

It is a drive solution for three-phase induction motors assembled on electrical panel with built-in CFW11 frequency inverter.

Its design, manufacture and assembly count on WEG’s experience, quality assurance, safety and excellent cost-effectiveness.

Two choices available, compact model - AFW11C - (mounted on panel with compact size) or standard model - AFW11 - (mounted on standard size panel), providing convenience and flexibility. They can be mounted with the available optional accessories, according to the application needs.

Drive with AFW11M Modular Frequency Inverter

The AFW11M, commonly referred to as “modular drive”, was developed for mounting on a modular structure, and it is available to supply high output currents with the choice of specification according to the application needs.

They are supplied in the versions with air-cooled heatsink (AFW11M) or water-cooled heatsink (AFW11W), using the new generation of modular inverters CFW11M / CFW11W, in the voltages of 380 to 690 V, with input rectifier in six pulses, twelve pulses or regenerative.

Medium Voltage Variable Speed Drive MVW01

Designed to drive and vary speed of medium voltage motors, the MVW01 consists of a multi-level structure of medium voltage IGBT (6.5 kV) reducing the harmonic content of motor current to extremely low values.

WEG is the only Brazilian supplier of medium voltage, speed variation systems that produces all the components: input cubicle, oil or dry transformer, variable frequency drive and medium voltage motor.

The MVW-01 variable frequency drive includes state-of-the-art technology through a multi-level structure with high voltage IGBTs (6.5 kV), reducing the harmonic currents in the motor to extremely low levels. The configuration of the input rectifier in 12 or 18 pulses allows high power factor in the supply network, fully compliance with IEEE 519 Standard.

In terms of control, the MVW-01 operates with micro-processing, using 32 bit processors (64 bit busbar) with high speed and pointing float mathematics, assuring great motor control performance.

Multiplex

The main characteristic of the Pump Genius Multiplex is the control of two or more pumps in parallel with each pump being driven by its respective inverter. One of the inverter is the master and then selects which pumps will operate in order to keep/control the process value of the pumping system. An alternation between their activation is also performed, making it possible an equal use of the pumps.

MultiPump

The main characteristic of the Pump Genius Multipump is the control of two or more pumps in parallel using only one frequency inverter. The inverter selects which pumps will operate in order to keep/control the process value of the pumping system. An alternation between their activation is also performed, making it possible an equal use of the pumps. It can be configured in two manners, fixed or floating control.

MW500 Decentralized Drive

A Decentralized solution brings independence for all applications.The MW500 covers power levels from 2.2 to 3.7 kW (3 to 5 HP).

Servo Drive SCA06

High performance product that allows speed, torque and position control of three-phase servo motors, featuring excellent cost-beneft with PLC function, positioning blocks and CANopen included in the standard product.

Servo Motors SWA

Technical Features:

- Sine-wave counter-electromotive force

- Smooth and uniform rotation at all speeds

- Low noise and vibration

- Wide speed range with constant torque

- Low maintenance (brushless servo motors)

- High overload capacity

- Low inertia

- Quick dynamic response

Simplex

The main characteristic of the Pump Genius Simplex is the control of one pump using for this a frequency inverter that will control your speed as required by the user demand.

Soft-Starter SSW05

WEG soft starters are fitted with micro processors. They are high-tech and were designed to ensure the highest performance during starts and stops of induction motors.

Soft-Starters are electronic starters designed to accelerate, deccelerate and protect three-phase induction motors, controlling the voltage applied on the motor.

The SSW05 Plus Micro Soft-Starters, with DSP control (Digital Signal Processor) have been designed to supply an excellent performance during starting and stopping electric motors with excellent cost/benefit ratio.

The Operator Interface allows easy parameter setting, simplyfying the start-up and operation activities.

The SSW05 Plus Micro Soft-Starters are compact, optimizating the space in electrical panels and incorporates all protections for the driven motor.

Soft-Starter SSW06

Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors in power ratings from 2.2 to 1375 kW.

SSW06 Series Soft-Starter are static starters intended to accelerate, decelerate and protection of three phase induction motors. The control of the voltage applied to the motor by the means of the thyristors triggering angle variation, allows the soft-start to start and stop smoothly an electric motor.

With adequate adjustments of the variables, the torque produced is adjusted to the needs of the load, so the required current is going to be as low as possible for the starting procedure.

Soft-Starter SSW08

WEG soft starters are fitted with micro processors. They are high-tech and were designed to ensure the highest performance during starts and stops of induction motors.

WEG Soft-Starters are static starting switches, intended for the acceleration, deceleration and protection of three-phase, induction motors. The voltage control applied to the motor, by setting the thyristor firing angle, allows smooth starts and stops.

With proper variable settings, the torque produced is set to the requirement of the load, ensuring that the demanded current of the start is the lowest actually required.

Software WLP

The WLP or "WEG Ladder Programmer" is a Windows based software that allows the user to program using ladder language, command and monitor the equipaments.

Software WPS

Ladder programming according to IEC 61131-3.

Integral tool, same software, enabling screen edition of the HMI, PLC and configuration of the CANopen network.

Logic monitoring and on-line charts, recipe edition, file handling of the SD card.

SSW7000-Medium Voltage Soft-Starter

Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors. The MV soft-starter WEG is available for power ratings from 550 kW up to 3400 kW. Voltage range: 2.3 kV - 6.9 kV.

Soft-Starters are static starters that accelerate, decelerate and protect three-phase induction motors. The control of the voltage applied to the motor by means of adjustments to the firing angle of thyristors allows the soft-starter to start and stop an electric motor smoothly.

The SSW7000 is suitable for medium voltage motors. It reduces the voltage applied to the motor at start. As a consequence, motor current and torque is reduced for a smooth start. This eliminates impacts of inrush current on the power supply and impacts of mechanical shocks on the load and the coupling. This helps in reducing maintenance of bearings, couplings, gear boxes, pulleys, belts and chains, in addition to protecting the motor.

SuperDrive G2 - Software for Parametrization of Drives

This software permits parameter setting, command and monitoring of WEG drives.

Variable Speed Drive CFW08

High technology for motors driving. WEG VSDs offer several features like easy installation and operation, compact size and have a number of special functions. Available in power ratings from 0,25 to 15 kW.

The WEG CFW-08 Series is intended for speed control of three-phase induction motors. Designed for exclusively industrial or professional use, the VSD incorporates the most advanced technology and full features in a compact product, beyond a set of special functions available.

WEG CFW-08 VSDs are easy to install and operate. They are equipped with a optimized software that can be easily set through a Keypad, which enables them to process and control most of industrial machines.

In addition, the CFW-08 Plus series is equipped with dead time compensation technique, thus avoiding motor instability and providing increase of torque at low speeds.

Variable Speed Drive CFW09

High technology for motors driving. WEG VSDs offer several features like easy installation and operation, compact size and have a number of special functions. Available in power ratings from 1.1 to 1,100 kW.