Selected products were added to comparison
See products on comparison page
WEG steam turbine, TS-P line, is backpressure type, single stage and built with impulse technology. It operates on maximum conditions of 943 psia (65 bara) inlet steam pressure, 896 °F (480 °C) inlet steam temperature and can produce up to 2MW. This steam turbine line has been especially designed to drive mechanical equipment such as pumps, compressors, blowers, and others. It has constructive characteristics that meet the requirements of API 611 standard.
Technical Characteristics
- Impulse tecnology and single stage
- Backpressure
- Nominal power output up to 2 MW
- Inlet pressure up to 943 psia / 65 bar(a)
- Inlet temperature up to 896 °F / 480 °C
Comprehensive, integrated and smart solution
With a comprehensive range of products and solutions tailored for steam power generation and mechanical drives, WEG designs, manufactures, and installs steam turbines, gearboxes, generators, as well as control and automation panels. All the components are designed using advanced technology and adhere to rigorous international quality standards. The steam turbines are available for various industrial segments and operate with steam derived from diverse sources like biomass, biogas, natural gas, heat recovery, waste-to-energy, and more.
Segments:
- Food and Beverage
- Pulp and Paper
- Cement
- Corn Ethanol
- Wood
- Mining
- Oil, Gas and Petrochemicals
- Waste-to-energy
- Steel
- Sugar-energy
- Thermal power plants
- Others
What is a Steam Turbine?
It is a machine that extracts thermal energy from the steam and converts it to mechanical work on a rotating shaft. The thermal energy is converted into kinetic energy through the expansion of the steam inside the turbine. The steam flows through properly designed fixed blades (stator) and moving blades (rotor) so that, according to the principles of impulse or reaction, they can efficiently transfer energy to the turbine shaft. During the expansion, there is a change in enthalpy due to the decrease in pressure and temperature of the steam, as well as the increase in its specific volume. Depending on the flow rate, this results in a certain power output on the shaft. Thus, the mechanical energy generated on the turbine shaft allows for the drive of various types of rotating equipment, such as fans, pumps, mills, compressors, and also 2 or 4-pole generators for electricity production. WEG has its own technology for the design and manufacture of impulse and reaction steam turbines, with an output power of up to 150 MW. The turbine frames are available in single or multiple stages, backpressure and condensing, with or without controlled extraction, and can operate with superheated or saturated steam.
