text.skipToContent text.skipToNavigation text.skipToFooter

BFGC - Flameproof Ex db

BFGC4 is one of WEG flameproof TEFC three phase motor lines for IIC group of gas and combustible dust and is available for shaft height 250 up to 315M.

Brake Motor Multimounting (Aluminium) IE2

WEG Brake motor is perfect to equipment where fast safety stops, positioning and time saving are required. WEG braking solutions allows synergy in the production process, helping with agility and safety.

Brake Motor Multimounting (Aluminium) IE3

WEG Brake motor is perfect to equipment where fast safety stops, positioning and time saving are required. WEG braking solutions allows synergy in the production process, helping with agility and safety.

DrawWorks and Mud Pump

The Master line motors stand out for the flexibility of their electrical and mechanical design, resulting in a high-performance product, complying with the international standards and aligned with the global trends.

Flameproof Motor With Brake IE1

Following the highest safety standards, the Explosion Proof Brake motors offer a perfect solution for equipment where quick stops are required in hazardous environments. They are able to work in classified areas as zone 1 and zone 2, ensuring protection for industrial units and workers.

Flameproof Motor With Brake IE2

Following the highest safety standards, the Explosion Proof Brake motors offer a perfect solution for equipment where quick stops are required in hazardous environments. They are able to work in classified areas as zone 1 and zone 2, ensuring protection for industrial units and workers.

Roller Table

Severe operating conditions require stronger motors. The Roller Table motor’s frame is fitted with radial fins that prevent residue accumulation on the frame surface. The line is also fitted with an advanced sealing system, high protection against corrosion and high mechanical strength, thus requiring low maintenance and providing high durability and productivity for the steel mill industry.

Single Phase Multimounting (Aluminium)

Single-phase aluminium frame IP55 motor in versions start+run capacitors or run capacitor.

Typical apllication:
• Pumps
• Fans
• Compressors
• Pulleys
• Cranes
• Continuous conveyors
• Grinders
• Other general applications

Three-phase Induction Motors - W60 Line

The W60 line motors were designed to meet the requirements of industrial applications on compressors, pumps and fans, ensuring high performance and reliability, even under severe operating conditions.

Top Drive

The T line motors are developed and manufactured according to the requirements of the main international standards.

This line is designed for operation with frequency inverter and continuous torque in a wide range of speeds.

W21 Fan & Exhaust (Aluminum)

Specially designed for manufacturers of axial fans, the Fan and Exhaust motors are compact, light and an excellent choice for the following applications:

- Fans and exhausters

- Tunnels

- Subways

- Air Conditioning Systems

- Underground coal mines

- Shopping malls

- Supermarkets

- Other applications

W22 Brake Motor IE2

W22 Brake Motor provide the production process with synergy and agility.
Featuring a braking system with high torque and durability, the W22 Brake Motor is ideal for equipment that requires fast stops for safety, accurate positioning and time saving. Motors comply with the efficiency level IE2, as per IEC 60034-30-1, and with the scope of the European Regulation (when driven by frequency inverter).

W22 Brake Motor IE3 Premium

W22 Brake Motor provide the production process with synergy and agility.
Featuring a braking system with high torque and durability, the W22 Brake Motor is ideal for equipment that requires fast stops for safety, accurate positioning and time saving. The motors have high efficiency and comply with the efficiency level IE3, according to IEC 60034-30-1, and with the scope of the European Regulation.

W22 Fan and Exhaust Cast Iron Frame Multivoltage IE3

Specially designed for axial fan manufacturers, the Fan and Exhaust motors are compact and represent a great choice for the following applications:
Fans and hoods
Tunnels
Subways
Air Conditioner Systems
Underground coal mines
Malls
Supermarkets
Other applications
They have cast iron housing, with flexible mounting and comply with the efficiency level IE3, according to IEC 60034-30-1, and with the scope of the European Regulation.

W22 Magnet IE4 Super Premium

W22 Magnet motors are synchronous motors with permanent high performance magnets inside their rotor resulting in differentiated characteristics. The W22 Magnet Line offers IE4 Super Premium performance, more horsepower per frame size, wide range of torque with constant torque without the need for forced ventilation and higher lifespan.
WEG technology provides greater efficiency, quality and saving for the industry.
The motors have high efficiency and comply with the efficiency level IE4, according to IEC 60034-30-1, and with the scope of the European Regulation.

W22 Magnet IE5 Ultra Premium

W22 Magnet motors are synchronous motors with permanent high performance magnets inside their rotor resulting in differentiated characteristics. The W22 Magnet Line offers IE5 Ultra Premium performance, wide range of torque with constant torque without the need for forced ventilation and higher lifespan.
WEG technology provides greater efficiency, quality and saving for the industry.

W22 Single Phase

High starting torque. Suitable for domestic and rural power supply conditions. Adaptable design suitable for a variety of applications and needs.

W22 Smoke Extraction F250 (2 hours) TEAO IE1

The Smoke Extraction motors were developed so as to ensure the air circulation in closed environments. In emergency situations, they withstand operation at high temperatures and ensure fast smoke extraction and heat, besides delaying the fire propagation, allowing free access to the emergency exits.

W22 Smoke Extraction F250 (2 hours) TEAO IE2

The Smoke Extraction motors were developed so as to ensure the air circulation in closed environments. In emergency situations, they withstand operation at high temperatures and ensure fast smoke extraction and heat, besides delaying the fire propagation, allowing free access to the emergency exits.
The motors have high efficiency and comply with the efficiency level IE2, as per IEC 60034-30-1, and with the scope of the European Regulation (when driven by frequency inverter).

W22 Smoke Extraction F250 (2 hours) TEAO IE3

The Smoke Extraction motors were developed so as to ensure the air circulation in closed environments. In emergency situations, they withstand operation at high temperatures and ensure fast smoke extraction and heat, besides delaying the fire propagation, allowing free access to the emergency exits.
The motors have high efficiency and comply with the efficiency level IE3, according to IEC 60034-30-1, and with the scope of the European Regulation.

W22 Smoke Extraction F250 (2 hours) TEFC IE1

The Smoke Extraction motors were developed so as to ensure the air circulation in closed environments. In emergency situations, they withstand operation at high temperatures and ensure fast smoke extraction and heat, besides delaying the fire propagation, allowing free access to the emergency exits.

W22 Smoke Extraction F250 (2 hours) TEFC IE2

The Smoke Extraction motors were developed so as to ensure the air circulation in closed environments. In emergency situations, they withstand operation at high temperatures and ensure fast smoke extraction and heat, besides delaying the fire propagation, allowing free access to the emergency exits.
The motors have high efficiency and comply with the efficiency level IE2, as per IEC 60034-30-1, and with the scope of the European Regulation (when driven by frequency inverter).

W22 Smoke Extraction F250 (2 hours) TEFC IE3

The Smoke Extraction motors were developed so as to ensure the air circulation in closed environments. In emergency situations, they withstand operation at high temperatures and ensure fast smoke extraction and heat, besides delaying the fire propagation, allowing free access to the emergency exits.
The motors have high efficiency and comply with the efficiency level IE3, according to IEC 60034-30-1, and with the scope of the European Regulation.

W22 Smoke Extraction F300 (2 hours) TEAO IE2

The Smoke Extraction motors were developed so as to ensure the air circulation in closed environments. In emergency situations, they withstand operation at high temperatures and ensure fast smoke extraction and heat, besides delaying the fire propagation, allowing free access to the emergency exits.
The motors have high efficiency and comply with the efficiency level IE2, as per IEC 60034-30-1, and with the scope of the European Regulation (when driven by frequency inverter).

W22 Smoke Extraction F300 (2 hours) TEAO IE3

The Smoke Extraction motors were developed so as to ensure the air circulation in closed environments. In emergency situations, they withstand operation at high temperatures and ensure fast smoke extraction and heat, besides delaying the fire propagation, allowing free access to the emergency exits.
The motors have high efficiency and comply with the efficiency level IE3, according to IEC 60034-30-1, and with the scope of the European Regulation.

W22 Smoke Extraction F300 (2 hours) TEFC IE2

The Smoke Extraction motors were developed so as to ensure the air circulation in closed environments. In emergency situations, they withstand operation at high temperatures and ensure fast smoke extraction and heat, besides delaying the fire propagation, allowing free access to the emergency exits.
The motors have high efficiency and comply with the efficiency level IE2, as per IEC 60034-30-1, and with the scope of the European Regulation (when driven by frequency inverter).

W22 Smoke Extraction F300 (2 hours) TEFC IE3

The Smoke Extraction motors were developed so as to ensure the air circulation in closed environments. In emergency situations, they withstand operation at high temperatures and ensure fast smoke extraction and heat, besides delaying the fire propagation, allowing free access to the emergency exits.
The motors have high efficiency and comply with the efficiency level IE3, according to IEC 60034-30-1, and with the scope of the European Regulation.

W22 Water Cooled

WEG Water Cooled motors can be used in a wide variety of applications and are mainly recommended where space and noise level reduction is required.

Areas with difficult access for maintenance are also part of the scope of application of WEG Water Cooled motors.

W22 WIMES

High performance, a comprehensive build specification coupled with maximum energy efficiency, all backed by a 3 year warranty, this is the philosophy of the WIMES compliant W22 motor range from WEG.

W22Xd Rib Cooled - Low Inrush Current (Is/In ≤ 4.5)

Flameproof motors designed to meet the latest market requirements and certifications for Hazardous Areas. Offer high efficiency, low noise and vibration levels and allow applications in severe duties.

W22Xd Rib Cooled - Rolling Bearings

Flameproof motors designed to meet the latest market requirements and certifications for Hazardous Areas. Offer high efficiency, low noise and vibration levels and allow applications in severe duties.

W22Xd Rib Cooled - Sleeve Bearings

Flameproof motors designed to meet the latest market requirements and certifications for Hazardous Areas. Offer high efficiency, low noise and vibration levels and allow applications in severe duties.

W22Xd Tube Cooled - Rolling Bearings

Flameproof motors designed to meet the latest market requirements and certifications for Hazardous Areas. Offer high efficiency, low noise and vibration levels and allow applications in severe duties.

W22Xd Tube Cooled - Sleeve Bearings

Flameproof motors designed to meet the latest market requirements and certifications for Hazardous Areas. Offer high efficiency, low noise and vibration levels and allow applications in severe duties.

W40 IE2

High efficiency cast iron frame IP23 motor complying with IE2 efficiency levels according to IEC 60034-30-1.

W40 IE3

High efficiency cast iron frame IP23 motor complying with IE3 efficiency levels according to IEC 60034-30-1.

Water Jacket Cooled Motor

WGM20 motor is a compact product that was designed to meet several industrial applications. This motor is suitable to operate in reduced-space and aggressive environments that demand low noise level and minimum thermal dissipation to the environment. The product was designed with a cooling system consisting of longitudinal cooling water channels, allowing inspection and cleaning much easier, then reducing maintenance costs.

Water Jacket Cooled Motor

WGM20 motor is a compact product that was designed to meet several industrial applications. This motor is suitable to operate in reduced-space and aggressive environments that demand low noise level and minimum thermal dissipation to the environment. The product was designed with a cooling system consisting of longitudinal cooling water channels, allowing inspection and cleaning much easier, then reducing maintenance costs.