Selected products were added to comparison
See products on comparison page
The FSW Fuse-Switch-Disconnectors, developed according to International Standard IEC 60947-3 and bearing CE certification, are applied in electric circuits in general to provide the disconnection and protection against short circuits and overloads by means of NH blade contact fuses.
There are versions for fuses NH000 up to NH3 with rated currents of 100A up to 630A, respectively.
Description
The FSW Fuse-Switch-Disconnectors, available up to 630A, are applied in electric circuits in general to provide the disconnection and protection by means of NH blade contact fuses. The FSW Fuse-Switch-Disconnectors, developed according to International Standard IEC 60947-3 and bearing CE certification, are applied in electric circuits in general to provide the disconnection and protection against short circuits and overloads by means of NH blade contact fuses. There are versions for fuses NH000 up to NH3 with rated currents of 100A up to 630A, respectively.
Main Characteristics
- Manufactured with reinforced thermoplastic materials and flame retardant;
- Allows checking the state of the fuses through a transparent cover;
- Small openings allow electrical measurements without interrupting the operation;
- Due to arc chambers enable opening under load;
- Auxiliary contact;
- Cover is removable, allowing simple and safe fuse replacement.
