• Excellent cost versus benefit ratio
• Optimization of environmental resources
• Updated electrical features
• Noise level reduction
• Vibration level reduction
• Easier maintenance
• Improved efficiency levels
• 3 year warranty

• Stator frame, endshields and terminal boxes made from high grade FC-200 cast iron;
• Cooling method: TEFC (Totally enclosed fan cooled) – IC411;
• Rated output: 0.12 to 500 kW;
• Number of Poles: 2, 4, 6 and 8;
• Frame sizes: 63 up to 355A/B;
• Frequency: 50 Hz;
• Voltages: 220-240/380-415V (up to frame size 100L) /380-415/660V (112M to 355A/B);
• Design N;
• Service factor: 1.00;
• Ambient temperature: -30°C to 40°C, at 1000 m.a.s.l.;
• Relative humidity up to 95%;
• Degree of protection: IPW55;
• Class “F” insulation (ΔT=80 K);
• Mounting: B3T foot (with top terminal box);
• Continuous duty: S1;
• Vibration level: Grade A as per IEC 60034-14;
• External earth terminals;
• Stainless steel nameplate AISI 316;
• Fan Covers: Steel for frames 63 to 132M and Cast Iron for frames 160M to 355A/B;
• WISE® (WEG Insulation System Evolution) insulation system - suitable for inverter duty applications*;
• Insulated NDE bearing hubs as standard for frames 280S/M to 355A/B;
• Thermistors (1 per phase) fitted as standard (frames 63 to355A/B);
• Space heaters (dual voltage 110V and 230V) fitted as standard (frames 63 to 355A/B);
• Additional terminal box for thermistors and space heaters as standard with WIMES compliant heater warning label;
• Metric threaded cable entries for mains and auxiliary terminal boxes;
• Bearings: Metal shielded (ZZ) sealed for life bearings for frames 63 to 132;
• Regreasing nipples for frames 160M to 355A/B;
• Bearing / shaft seals:
• B3 motors - Oil seals for frames 63 to 200L / WSeal® for frames 225S/M to 355A/B;
• B5 motors - Oil seals for frames 63 to 280S/M / Viton seals for frames 315S/M to 355A/B;
• Painting: Two-pack epoxy paint finish (Plan 202E) for aggressive sheltered industrial environments;
• Finish Colour:RAL 5010.

*For additional details about Inverter operation, please contact our technical support team.

• Mains terminal box on left or right side;
• Oversized terminal box (frame 355A/B);
• Motors with Flange FF, C-DIN and superior / inferior;
• Alternative voltages / frequencies;
• Higher number of poles;
• Design H;
• Class “H” insulation;
• Tropical protection for Relative Humidity >95%;
• Vibration level: Grade B as per IEC 60034-14;
• Provision for vibration detectors SPM;
• Thermal protection: Thermostats or RTD (PT-100) inwindings or bearings;
• Degrees of protection: IP56, IP65, IP66;
• Bearing / shaft seals: Taconite Labyrinth and W3 Seal®;
• Cooling Fans: Aluminium, cast iron and bronze;
• Drip cover for vertical applications;
• Double shaft extension;
• Stainless steel shaft;
• Insulated DE or NDE bearings for frames 225S/M to355A/B;
• Encoders;
• Forced ventilation TEBC (Totally Enclosed Blower Cooled);
• Roller bearings for high radial loads (frames 160M to355A/B);
• Cable glands in plastic and brass;
• Alternative painting plans for more aggressiveenvironments;
• WIMES compliant motors for hazardous environments(Ex d, Ex n etc).

More options available, on request