text.skipToContent text.skipToNavigation text.skipToFooter

Fuse-Switch-Disconnectors FSW

The FSW Fuse-Switch-Disconnectors, developed according to International Standard IEC 60947-3 and bearing CE certification, are applied in electric circuits in general to provide the disconnection and protection against short circuits and overloads by means of NH blade contact fuses.

There are versions for fuses NH000 up to NH3 with rated currents of 100A up to 630A, respectively.

RFW Rotary Switch-Disconnectors

The RFW switch-disconnectors are compatible with several applications, such as: switch board panels and main switches for different equipment and machines. The RFW switches comply with the international standards of product performance IEC 60947-3 and IEC 60947-1 and feature NH gL/gG type fuse holder bases for the sizes: 000, 00, 1, 2 and 3.

Available in the currents of 100 A, 160 A, 250 A, 400 A, and 630 A.

Its rotary drive is done by means of a direct front handle or by external panel door handles. The external panel door handles are optional. The panel door handle allows locking with a padlock in the OFF position.

RIW Rotary Switch-Disconnectors

The RIW switch-disconnectors were developed for operation under load, observing the international standards of product performance IEC 60947-3 and IEC 60947-1.

Available in currents of 100 A, 160 A, 250 A, 400 A, 630 A, and 1250 A.

Its rotary drive is done by means of a direct front handle or by external panel door handles. The external panel door handles are optional. The panel door handle allows locking with a padlock in the OFF position.

Switch-Disconnector SIW

Intended for electrical circuit switching and disconnection under normal conditions up to 100A. Available in a modular frame of 2, 3 and 4 poles.

- Electrical circuit disconnection up to currents of 100 A

- Available in 2, 3 and 4 poles

- Technical specification acc. to IEC 60947-3

Switch-Disconnectors MSW

The MSW Switch-Disconnectors enable the manual drive of motors, machines and other equipment. Available in versions to mount on panel doors or base with currents up to 160A.

The MSW Switch-Disconnectors were developed according to IEC60947-3 and UL508, enable carrying and interrupting electric currents under normal or overload conditions and provide complete physical insulation between the circuit and the power supply when in OFF position.