text.skipToContent text.skipToNavigation text.skipToFooter

ACW Molded Case Circuit Breakers

Available in two levels of short-circuit interrupting capacity (35 & 65kA @ 480Vac),the ACW Series assures top performance from 15 to 800Amps.Common plug-in accessories simplify field installation and minimize inventory.

Introducing the WEG ACW Series of Molded Case Circuit Breakers now available with UL489 certification.Available in four different compact frames, the New ACW Series will assure top performance for power distribution on both thermal and short-circuit protection from 15 to 800Amps.

Its robust desing and double contacts structure optmize performance and increase breaking capacity (kA rms). The ACW series is available in two levels of short-circuit interrupting capacity – standard industrial & commercial applications (35kA), as well as required in high-performance applications (65kA). Common plug-in accessories simplify field installation and minimize inventory variations on distributors’ shelves.

Air Circuit-Breaker ABW

Ideal for the protection of high power low-voltage electrical circuits. Rated operational currents up to 6300A and high short-circuit breaking capacity. Available with 3 or 4 poles for both versions:fixed or withdrawable

Circuit breakers are devices used to protect electrical circuits and related equipments from overload and short-circuit overcurrents. It is imperative to choose and size circuit breakers according to each specific application, and level of protection imposed by safety requirements.

WEG series of Air Circuit Breakers offers high breaking capacity to protect low voltage applications in high power circuits. Its modular design is enhanced by only four different frame sizes to best suit most applications.

Capacitors Lighting - CLAW

- Rated Voltage Un: 250V

- Rated frequency: 50/60 Hz

- Capacitance tolerance: ± 5%

- Dielectric loss of the capacitor (120Hz): < 0.4W/kVAr

- Ambient temperature: -25ºC to 85ºC

- Maximum admissible voltage: 1.10.Un

- Maximum admissible current: 1.3.In

- Life expectancy: 10 years*

- Reference standards: IEC 61048

- Protection Safety Class: A

* In compliance with IEC 61049.

Capacitors Motor-Run - CMRW

The CMRW capacitors are designed for application in combination with electric motors.

Connection Systems - Terminal Blocks BTWI

The terminals of the BTWI line allow direct connection of different cables without requiring any tools - from flexible cables with crimped terminal to rigid bare wires.

The special shape of the terminal spring allows the safe fitting of the conductors. The contact spring opens automatically during the insertion of the conductor and ensures the necessary force to press the conductor against the current conducting bar. The structure of the spring body also ensures the progressive locking and anti-vibration of the conductor. The opening of the spring to release the conductor is performed by the driver, using a common tool with a screwdriver tip.

Connection Systems - Terminal Blocks BTWM

The terminals of the BTWM line use the cage clamp technique. In this very simple and effective system, the connection is done by means of the stainless steel spring that constantly presses the conductor against the internal copper element.

The connection procedure is simple: the conductor insulation is removed, a screwdriver is inserted into the square hole of the terminal to compress the spring and enable access, and then the conductor is inserted into the terminal.

When the screwdriver is removed, the connection is done. The contact pressure in this connection system is uniform and independent from the user/operator, because it is provided by the spring.

Main Characteristics of the Terminals of the BTWM Line:

- Borne housing in polyamide PA66, with excellent dielectric properties and high mechanical strength

- Internal conductor element with high current carrying capacity

- Stainless steel spring

- Even contact pressure

Connection Systems - Terminal Blocks BTWP

The terminals of the BTWP line use the screw type connection technique. The length of insulation to be removed and the tightening torque for each terminal model are indicated in the selection tables.

When the screw is tightened, the resulting pressure deforms the terminal, locking the screw so it will not get loose. This system ensures the final quality of the connection with minimum electric losses.

CWMC Contactors

WEG CWMC25, CWMC32, CWMC50 and CWMC65 contactors were specially designed to operate power factor correction capacitors (utilization category AC-6b). Special development to perform specific operations for this type of application.

CWMS Contactors for Safety Applications

CWMS power contactors (9A to 105A @ AC-3) and CAWMS auxiliary contactors used in safety systems of machinery and equipment.

Distribution Board QDW

Plastic-injected distribution boards flush and wall mounting with slots for 4 to 36 poles.

Enclosed Non-Combination Starters - ESW Series

Ready to use Enclosed Full Voltage magnetic starters are the most commonly used devices to switch AC motor loads.

WEG's non-reversing non-combination starter consisting of a contactor and a bimetallic overload relay assembled together inside a NEMA type 1 enclosure. Two optional pilot devices are available factory-mounted.

Either START / STOP pushbuttons or no-pilot device on the cover are on the shelves ready to go. Field Kit modifications are also available as accessories.

Enclosed Non-Combination Starters - PESW Series

WEG offers non-reversing and non-combination NEMA-4X magnetic starter up to 75HP at 460V.

Featuring components that meet IEC design standards and UL horsepower ratings, incorporating WEG contactors and overload relays, the PESW magnetic starters are ideal to protect motors and ensure reliable operation year-after-year. Assembled together in a NEMA 4X enclosure with two options off the shelf: Start/Stop Pushbutton and RESET or just the RESET button on the cover for quick and easy operation.

WEG PESW starters are recommended for all single and three phase applications where across-the-line starters can be applied.

Enclosed Starters - DLW / DLWM - Plastic Enclosures

WEG's Motor Starters are designed to switch and protect three-phase and single-phase eletric motors.

Fuse-Switch-Disconnectors FSW

The FSW Fuse-Switch-Disconnectors, developed according to International Standard IEC 60947-3 and bearing CE certification, are applied in electric circuits in general to provide the disconnection and protection against short circuits and overloads by means of NH blade contact fuses.

There are versions for fuses NH000 up to NH3 with rated currents of 100A up to 630A, respectively.

High Speed Fuses

WEG type D and type NH fuses (class gL/gG) are designed with high quality ceramic body.

High Speed Fuses - Flush End

The ultra-fast, flush-end style aR fuses are mounted in high-quality ceramic housings. They have impregnated quartz sand filling, fuse elements of pure silver, and silver plated copper connections, providing excellent electric insulation, mechanical strength, resistance against thermal shocks during fuse trips, and reduced I²t values. Their structure is designed for direct mount on copper busbars, without requiring individual mounting bases or switch-disconnectors.

Miniature Circuit-Breakers MDW and MDWH

MDW - MDWH range of miniature circuit-breakers performs overload and standard short-circuit protection of electrical circuits.

Miniature Circuit-Breakers MDW 3kA:

- Rated currents from 2 to 100A

- Tripping characteristic curves B and C

- MCB in 1, 2, 3 and 4 poles

Miniature Circuit-Breakers MDWH 10kA:

- Rated currents from 6 to 63A

- Tripping characteristic curves B and C

- MCB in 1, 2, 3 and 4 poles

Molded-Case Circuit-Breakers DW (IEC)

Designed to protect electrical circuits, generators and motor branch circuits against overcurrent conditions, WEG’s Molded-Case Circuit-Breakers go up to 1600A and short-circuit breaking capacity up to 80kA @ 380/415V.

Molded-Case Circuit-Breakers DW (UL)

Introducing the WEG DWB Series of Molded Case Circuit Breakers now available with UL 489 certification. With its two compact frames, the DWB UL provides protection from 20 to 400 amperes in two versions: Standard 80% rated and Premium 100% rated. The DWB UL also has two levels of short circuit interrupting capacity and common internal accessories that simplify field installation and minimize inventory variations.

Push Button / Selector Switch / Pilot Light

Developed for harsh environments and industrial applications, WEG Control and Pilot Lights line employs high technology in the project and manufacture, and offers modern and ergonomic design.

Residual Current Circuit-Breaker RDW

Devices designed to protect people and electrical installations against the effects of direct or indirect contacts due to loss of insulation of conductors.

RFW Rotary Switch-Disconnectors

The RFW switch-disconnectors are compatible with several applications, such as: switch board panels and main switches for different equipment and machines. The RFW switches comply with the international standards of product performance IEC 60947-3 and IEC 60947-1 and feature NH gL/gG type fuse holder bases for the sizes: 000, 00, 1, 2 and 3.

Available in the currents of 100 A, 160 A, 250 A, 400 A, and 630 A.

Its rotary drive is done by means of a direct front handle or by external panel door handles. The external panel door handles are optional. The panel door handle allows locking with a padlock in the OFF position.

RNW - Level control

The RNW, WEG level control relay, is an electronic control device that allows monitoring and automatic setting of level of conductive (non-explosive) liquids by means of submerged electrodes. It has front selector that allows adjusting the electronic circuit to the resistivity of the liquid.

RPW Protective Relay

WEG RPW relays are electronic devices that protect the three-phase systems against phase loss or neuter loss (selectable) (RPW FF), phase sequence inversion (RPW SF) or both functions integrated in the same product (RPW FSF). Whenever an anomaly occurs in the system, the relay will switch its output to interrupt the motor or process to be protected. Designed according to international standards, the RPW is a compact and safe solution in 22.5-mm wide boxes for mounting on DIN rail 35mm.

Standards: IEC / EN 60947-1 and IEC / EN 60947-5-1

RTW Timer Relays

WEG RTW timer relays are electronic devices that allow, due to adjusted times, to switch an output signal according to its function. Commonly used in the automation of industrial processes and machines like motor starters, control switchboards, industrial ovens, casting machines, among others.

It has digital electronics, which provides high accuracy, repeatability and noise immunity.

Designed according to international standards, the RTW is a compact and safe solution in 22.5-mm wide boxes for mounting on DIN rail 35mm, in configurations with 1 or 2 NONC outputs and supplied with 110-130V 50/60Hz, 220-240V 50/60Hz or 24Vdc.

RW - Thermal Overload Relays

Protection relays for electric motors up to 840A. Assembled directly to the contactors or to an individual base. Trigger classification 10.

RW_E - Electronic Overload Relays

The RW_E is meant to assure increased reliability for protection of low voltage three-phase electric motors in sinusoidal 50/60 Hz networks where reliability, low power dissipation and ease maintenance management are mandatory.

Smart Relay SRW01

The smart relay SRW01 series is a low-voltage, electric motor management system with state-of-the-art technology and network communication capabilities. Its high reliability and precision make the SRW01 suitable for the toughest industrial applications.Additionally, its modular concept allows easy functionality expansionsit and wide application coverage. The main function of the SRW01 is to protect and control electric motors in their most diverse industrial applications. Due to its reduced size and modular design, the relay is frequently used when space for its assembly is a determining point, The on-line monitoring options, failure diagnosis and failure statistics allow preventive maintenance to be more effective, thus reducing the number of downtimes. It covers wide application for continuous process plants in the following market segments.

The relay offers pre-programmed operating modes that perform some types of standard starting and monitoring conditions. Its friendly parameterization mode allows users to program the relay according to their needs.

Surge Suppressors - SPW

Available in the single-phase, plug-in version for degree of protection I and II, the SPW is a protection device against voltage surges in the power line. Developed in versions with or without remote signaling contact, the SPW features visual signaling to indicate the moment to replace the protection module, and it is divided into four models, according to the prospective maximum discharge current (wave 8/20 µs): 12, 20, 45 and 60 kA. Removable protection modules are supplied as replacement accessories to all the models.

Switch-Disconnector SIW

Intended for electrical circuit switching and disconnection under normal conditions up to 100A. Available in a modular frame of 2, 3 and 4 poles.

- Electrical circuit disconnection up to currents of 100 A

- Available in 2, 3 and 4 poles

- Technical specification acc. to IEC 60947-3

Three-pole Contactors CWM

WEG’s three-pole contactors present high technology and safety, and easy installation. Besides, its enclosed construction according to VDE 0106, the UL approval, and its easy access connections for one or two conductors.

Three-pole Contactors CWM (NEMA)

The WEG CWM_N series NEMA rated contactor line has been designed for industrial duty and with reliability in mind. Rated for inductive loads up to 300 Amps or 200 HP @ 460 V, WEG can offer the suitable contactor for your application.

Customers who are used to specifying contactors (and starters), by a particular NEMA Size (size 00, 0, 1, 2, 3, 4, 5), now can use the WEG CWM_N series, NEMA rated contactors. Customers get the ease of choosing the product, the reliability of WEG quality, and still get the sophisticated arc quenching techniques to reduce excess heat on the contacts.

Given their compact footprints, CWM_N contactors allow total panel space optimization, with only a few compact frame sizes from 5 to 200 HP @ 460 V.

Reducing inventory is a “snap” with CWM’s common accessories. For example, side mounted auxiliary contact blocks are the same from 5 to 200 HP @ 460 V.

TTW01 - Type-Tested Assembly

The TTW01 - Low voltage modular panels that meets the IEC 60439-1 and IEC 60439-3 standards, with total operational and maintenance security because of their characteristics TTA/PTTA.

Developed to meet the requirements of the switchboards loads of high electrical currents and high levels of short-circuit current, with switchgear equipment and protection that meet the requirements of quality, security and performance.

Their modularity allows future expansions without having to make adjustments during assembly, the modular structure is simple to install and sizing, allowing mounting the panels by integrators duly trained by WEG.

Type D and Type NH Fuses (class gL/gG)

WEG type D and type NH fuses (class gL/gG) are designed with high quality ceramic body.