text.skipToContent text.skipToNavigation text.skipToFooter

Distribution Board QDW

Plastic-injected distribution boards flush and wall mounting with slots for 4 to 36 poles.

Miniature Circuit-Breakers MDW and MDWH

MDW - MDWH range of miniature circuit-breakers performs overload and standard short-circuit protection of electrical circuits.

Miniature Circuit-Breakers MDW 3kA:

- Rated currents from 2 to 100A

- Tripping characteristic curves B and C

- MCB in 1, 2, 3 and 4 poles

Miniature Circuit-Breakers MDWH 10kA:

- Rated currents from 6 to 63A

- Tripping characteristic curves B and C

- MCB in 1, 2, 3 and 4 poles

Residual Current Circuit-Breaker RDW

Devices designed to protect people and electrical installations against the effects of direct or indirect contacts due to loss of insulation of conductors.

Surge Suppressors - SPW

Available in the single-phase, plug-in version for degree of protection I and II, the SPW is a protection device against voltage surges in the power line. Developed in versions with or without remote signaling contact, the SPW features visual signaling to indicate the moment to replace the protection module, and it is divided into four models, according to the prospective maximum discharge current (wave 8/20 µs): 12, 20, 45 and 60 kA. Removable protection modules are supplied as replacement accessories to all the models.

Switch-Disconnector SIW

Intended for electrical circuit switching and disconnection under normal conditions up to 100A. Available in a modular frame of 2, 3 and 4 poles.

- Electrical circuit disconnection up to currents of 100 A

- Available in 2, 3 and 4 poles

- Technical specification acc. to IEC 60947-3